- Home
- Products
- PPE
- Masks and Respirators
- Disposable Particulate Respirators
- 3M 9914 FFP1 Cup-Shaped Valved Dust/Mist/Nuisance Odour Respirators
3M 9914 FFP1 Cup-Shaped Valved Dust/Mist/Nuisance Odour Respirators
-
£207.40 excl. VAT
-
£248.88 inc. VAT
3M 9914 FFP1 Cup-Shaped valved Dust/Mist/Nuisance Odour Respirators have an active carbon layer for relief from nuisance odours in various specialities from welding to waste sorting.
Provides relief from nuisance levels of organic vapours and respiratory protection against low levels of fine dusts and mists
- Relieves irritation: designed to offer relief from the irritation of low levels of specific gases and vapours, often present alongside particulate hazards - Reliable, effective protection against fine particulates
- Activated carbon layer provides relief from low levels of specific gases and vapours
- Durable collapse resistant inner shell
- Good fit over a wide range of face sizes provided by convex shape, nose clip and twin-strap design
- Comfortable, lightweight off-the-face design
- 3M™ Cool Flow™ Valve reduces heat build-up to offer comfortable protection, particularly in hot and humid conditions
- Yellow colour coded straps denote FFP1 protection level
Standard: EN149:2001 FFP1
Approval: CE Marked
Maximum use concentration: Particulates: 4 x WEL* and below WEL for organic vapours
*Workplace Exposure Limit
We have compiled our most asked questions into our blog and information database called Camblab. Below you will find any relevant posts and external links to Camblab, where we will explain topics in more information.
What is the difference between FFP1, FFP2 and FFP3 disposable masks?
Whats the difference between valved and unvalved respirator masks?
Does my respirator mask need to be fit tested?
Safe disposal of PPE and potentially contaminated waste from Covid-19 exposure
Sterilisation of Respirator Masks
What’s the difference between surgical and respirator masks?
Fit Testing Requirements
If your company uses tight-fitting respiratory protective equipment (RPE) then a fit test is a legal requirement. The fit test functions to ensure the mask correctly fits the wearer’s face and therefore is able to provide its stated respiratory protection. Ill-fitting masks will not have the required tight seal and are leaky and vulnerable to bypass by contaminants. Mask types that require a fit test are:
- Disposable respirators (Qualitative or Quantitative test)
- Re-useable half face masks (Qualitative or Quantitative test)
- Re-useable full face masks (Quantitative test only)
Products in this Range
