Instachlor PR-1000 Rapid Release Chlorine Tablets - Pack of 100

Available Chlorine with 1x PR-1000 tablet:

• 1 litre of water: 1000mg/l
• 10 litres of water: 100mg/l
• 50 litres of water: 20mg/l
• 100 litres of water: 10mg/l
• 500 litres of water: 2mg/l
• 1000 litres of water: 1mg/l

Each tablet provides:

• 1700mg/l (1.7g/l) of active ingredient (NaDCC)
• 1000mg/l (1g/l) of available chlorine content
• Tablet diameter: 18mm

Palintest Instachlor PR tablets are a range of rapid dissolving chlorine release tablets for professional applications in water treatment and disinfection. The range is comprised of five different sizes of tablet specially selected to suit a wide variety of uses. The tablets are prepared from an effervescent formulation containing sodium dichloroisocyanurate (NaDCC) - an organic chlorine donor.

Instachlor tablets dissolve rapidly when added to water and release chlorine into solution. Instachlor PR tablets provide a simple and effective means of preparing chlorine solutions of known strength for chlorination, disinfection, or sterilisation purposes. The tablets may be added direct to water containers, water tanks, wells or small reservoirs.

The choice of Instachlor PR tablet will depend on the quantity of water to be treated.

The tablets should be used in accordance with standard water chlorination practice depending on the water to be treated and the purpose of treatment. Where chlorination is to be carried out to disinfect the water, a free chlorine residual of 1 mg/l should be achieved in the treated water. Note that it will normally be necessary to add a higher dose to satisfy the chlorine demand of the water. Whenever possible the water should be drawn from a clean source.

A chlorine dose of 2.5 mg/l and a standing period of at least 15 minutes is recommended. If a clean source of water is not available, or if any contamination is suspected, a higher chlorine dose, say 5 mg/l, should be applied. In all cases it is recommended that you test the water using (for example) Palintest Chlorocol, DPD or ChloroSense tests to check that an adequate chlorine residual has been achieved in the treated water.

Instachlor tablets (Dichloroisocyanurate or Di-Chlor) tablets are fully compliant with current European Regulations, namely BS EN 12931 standard for chemicals used in the treatment of water for human consumption, and also with the US NSF Standard 60 - Drinking Water Treatment Chemicals.