Nabertherm flap door laboratory and industrial muffle furnace 24l 1100°C

Nabertherm flap door laboratory and industrial muffle furnace 24l 1100°C

This is the Nabertherm 24l flap door long-lasting 1100º muffle furnace for laboratory and industrial use. These relibale furnaces are ideally suited for a large number of processes in the field of material research and heat treatment. 

The furnace is customisable with a wide range of options.

Features:

• Heats to 1100°C (fully programmable)
• B510 controller offering 5 progams each with 4 programmable segments
• Heating from two sides by ceramic heating plates (heating from three sides for
  muffle furnaces 24l and 40l variants)
• Flap door
• Uses type N thermocouple for temperature control
• Temperature uniformity of +/- 5ºc with closed fresh air inlet in an empty workspace at temperatures above 800ºc
• Ceramic heating plates with integral heating element which is safeguarded and
  easy to replace
• Adjustable air inlet integrated in door
• Exhaust air outlet in rear wall of furnace
• For indoor use only

Mobile monitoring App:

• Free and easy to download
• Connects via wifi to furnace controller and does not interere with local business LAN systems
• Provides live monitoring for single or multiple furnaces simultaneously
• Provides a visual status of the furnace progress
• Provides push notifications
• Shows operating status of each furnace

Weights and dimensions:

• Weight (excluding packaging): 55kgs
• Internal dimensions (WxDxH): 280mm x 340mm x 250mm
• External dimensions (WxDxH): 490mm x 555mm x 580mm

Training:

• Free remote web based basic training covering the key features by Camlab employees

Warranty:

• 12 months manufacturers parts warranty
• 12 months Camlab labour warranty

Power supply:

• 3 phase power

Options:

• Supplied with 3l, 5l, 9l 15l, 24l, 40l and 60l capacity variants
• Available in 1100ºc, 1200ºc, 1300ºc and 1400ºc heating variants
• Flap door and lift door variants
• Over temperature limitor
• Protective gas connection to purge with non-flammable protective gases (not available in combination with chimney, chimney with fan or catalytic converter) not gas tight
• Manual or automatic gas supply system
• With intergrated precision balances
• B550 controller offering 10 progams each with 20 programmable segments
• Thermocouple port in rear or door of furnace
• Chimney with or without fan
• Catalytic converter
• Calibrated thermocouple

Ancillaries:

• Heat protective gloves
• Loading tongs
• Ceramic or metal collecting pan / plate
• Charging rack with closed or perforated trays for loading the furnace in two
  levels incl.
• Holder for inserting/removing the trays up to a max. temperature of

Verification and commissioning options:

• Camlab commissioning
• Installation Qualification
• Operational Qualification
• Performance qualification
• Single point calibration

Safety

This furnace is not suitable for processes generating explosive gas mixtures, e.g. debinding processes. If used for these kind of processes the concentration of organic gases in the furnace must never exceed 3% of the lower explosion level. This precondition is not only valid for normal operation but in particular for exceptional circumstances, e.g. process failures (caused by a module breakdown etc).

A wide range of furnaces, which are specially designed for processes generating explosive gas mixtures is availableor indoor use only.

For indoor use only.