3M 9322+ Aura FFP2 Fold-Flat Valved Dust/Mist Respirator - Pack of 5 x 8

We have compiled our most asked questions into our blog and information database called Camblab. Below you will find any relevant posts and external links to Camblab, where we will explain topics in more information.

What is the difference between FFP1, FFP2 and FFP3 disposable masks?

Whats the difference between valved and unvalved respirator masks?

Does my respirator mask need to be fit tested?

Safe disposal of PPE and potentially contaminated waste from Covid-19 exposure

Sterilisation of Respirator Masks

What’s the difference between surgical and respirator masks?

Fit Testing Requirements

If your company uses tight-fitting respiratory protective equipment (RPE) then a fit test is a legal requirement. The fit test functions to ensure the mask correctly fits the wearer’s face and therefore is able to provide its stated respiratory protection. Ill-fitting masks will not have the required tight seal and are leaky and vulnerable to bypass by contaminants. Mask types that require a fit test are:

• Disposable respirators (Qualitative or Quantitative test)
• Re-useable half face masks (Qualitative or Quantitative test)
• Re-useable full face masks (Quantitative test only)

Thank you for your interest in Camlab and the products we offer,

As you will understand due to the recent outbreak of a new Coronavirus, Camlab are experiencing an unusually high demand for the supply of personal protective equipment including masks. Whilst we are actively and diligently trying to fulfil the current demand for disposable respirators and surgical style masks through our wide supply chain, the manufacturers are now restricting the amount supplied to stockists.

Due to the fast moving nature of the current stock status our website may not reflect the up to the minute position and we suggest you contact us using either the online chat or call us on 01954 233110

Please refer to the links below for general information on the 2019 Novel Coronavirus (2019-nCoV) where more detailed information can be found.

World health organisation

https://www.who.int/news-room/q-a-detail/q-a-coronaviruses

Wearing a medical mask can help limit the spread of some respiratory disease. However, using a mask alone is not guaranteed to stop infections and should be combined with other prevention measures including hand and respiratory hygiene and avoiding close contact – at least 1 metre (3 feet) distance between yourself and other people.

WHO advises on rational use of medical masks thus avoiding unnecessary wastage of precious resources and potential mis-use of masks (see Advice on the use of masks). This means using masks only if you have respiratory symptoms (coughing or sneezing), have suspected 2019-nCoV infection with mild symptoms or are caring for someone with suspected 2019-nCoV infection. A suspected 2019-nCoV infection is linked to travel in an area in China where 2019-nCoV has been reported, or close contact with someone who has travelled from China and has respiratory symptoms.

UK Government latest information on Coronavirus

https://www.gov.uk/guidance/wuhan-novel-coronavirus-information-for-the-public?gclid=CjwKCAiAyeTxBRBvEiwAuM8dnUTiDXVuSIp4Vj6Ih0AnoS07kDeYcp1ZdV-xrY53ZZ0Ub6ajBFRFpRoCTPEQAvD_BwE

European Centre for Disease Prevention and Control

https://www.ecdc.europa.eu/en/geographical-distribution-2019-ncov-cases

 CDC – USA

The Centers for Disease Control and Prevention is the leading national public health institute of the United States.

https://www.cdc.gov/coronavirus/2019-nCoV/lab/lab-biosafety-guidelines.html

Update October 2020

The Uk government offered a VAT holiday on PPE products from1st of May to 31st of October. so this is now coming to an end and VAT wil charged on Goods from 2pm on th 30th October. Ay goods not shipped by the 30th October will be subject to VAT. This is due to VAT being applied at the point of invoice whioch is generated on shipping the goods from our warehouse. Customers affected will be contacted.

Dear Customer,

In these unprecedented times we have to deal with more product supply restrictions, price increases and surcharges being placed on our purchase orders for goods, particularly for critical Personal Protective Equipment (PPE).

It is important to note that many of these products are bought in foreign currency (dollars and euros) and due to recent large movements in exchange rate this has also negatively impacted the sterling cost price resulting in selling price increases. We intend to continue to provide all our main brands at normal list prices for as long as we can at this time although it is now clear that due to shortages and high demand national governments are restricting access to PPE products and in some cases applying additional export surcharges. Main manufacturers are also being asked to prioritise front line care workers.

Unfortunately from this point on we will have to include any additional government or increased freight surcharges applied to these products.  To help mitigate such increases we are setting up a PPE sourcing team to try and find alternative global manufacturers of these types of products in short supply to be able to offer our customers alternative similar products. We hope to be able to find cost effective alternatives and we are happy to work with our customers purchasing departments to try and negotiate bulk discount prices.

As they become available we will list them here https://www.camlab.co.uk/products/products-in-stock

Although we now have to pass on increases and surcharges please be assured that we are not inflating our profits. We are doing our best to overcome shortages by sourcing products from alternative suppliers of PPE, but in some cases the prices of these products are significantly above normal due to demand and in other cases they do not meet the correct PPE regulations that could put the public or medical professionals at risk if sold improperly. We are working with Trading Standards Institute (TSI) and the British Safety Industry federation (BSIF) by reporting these suppliers/providers who we believe are wrongly exploiting the current situation.

Unfortunately we are also finding that unscrupulous suppliers are offering us counterfeit products. Camlab is a member of the BSIF and we are working closely with them to ensure the items we source and sell are properly CE EN/149 rated and tested accordingly. Please note that category III products require much stricter requirements including ongoing market surveillance. Reporting and documentation retention is considerably more onerous on manufactures, suppliers and customers for Health and Safety records, recall, notification and withdrawal purposes.

We wish all our customers well in these trying times and hope we can all return to business as normal as soon as possible

Camlab mission:

To help our Scientific and Industrial customers find and choose the best products to achieve the right results.

Our Core values

Choice • Service • Trust

Useful Information – Things to Check

Is your supplier a member of the BSIF – https://www.bsif.co.uk/

 Is the product CE marked correctly?

 Have you a copy of the EU Declaration of Conformity?

 Has your supplier verified this product and has documentation available?

Medical devices EU regulations

The European Union Medical Device Regulation repeals the existing directives on medical devices: Medical Devices Directive [93/42/EEC] and Active Implantable Medical Device Directive [90/385/EEC]. The regulation was published on 5 May 2017 and came into force on 25 May 2017

 European Union (EU) Medical Device Regulation (MDR) 2017/745

PPE Standards

The standards, which cover face masks, medical gloves and protective clothing are listed below:

• BS EN 149:2001+A1:2009 Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking
• BS EN 166:2002 Personal eye protection. Specifications
• BS EN 14126:2003 Protective clothing. Performance requirements and tests methods for protective clothing against infective agents
• BS EN 14605:2009+A1:2009 Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
• BS EN 13795-1:2019 Surgical clothing and drapes. Requirements and test methods. Surgical drapes and gowns
• BS EN 13795-2:2019 Surgical clothing and drapes. Requirements and test methods. Clean air suits
• BS EN 455-1:2000 Medical gloves for single use. Requirements and testing for freedom from holes
• BS EN 455-2:2015 Medical gloves for single use. Requirements and testing for physical properties
• BS EN 455-3:2015 Medical gloves for single use. Requirements and testing for biological evaluation
• BS EN 455-4:2009 Medical gloves for single use. Requirements and testing for shelf life determination
• BS EN 14683:2019 Medical face masks. Requirements and test methods.
• BS EN ISO 10993-1:2009 Biological evaluation of medical devices. Evaluation and testing within a risk management process
• BS EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• BS EN ISO 13688:2013 Protective clothing. General requirements
• BS EN 13795-1:2019 Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
• BS EN 29073-3:1992 Methods of tests for Nonwovens - Part 3: Determination of tensile strength and elongation
• BS EN ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing
• BS EN ISO 811:2018 Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
• BS EN ISO 9073-10:2004 Textiles - Test methods for nonwovens - Part 10:  Lint and other particles generation in the dry state
• BS EN ISO 10993-1:2009 Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process
• BS EN ISO 11737-1:2018 Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products
• BS EN ISO 13938‑1:2019 Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension
• BS EN ISO 22612:2005 Clothing for protection against infectious agents — Test method for resistance to dry microbial penetration
• ISO 22610:2018 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration