Memmert Waterbath WNE10 10L + 10°C -+ 95°C

The Excellent series of Memmert water baths features

• Fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• Solid state switching unit 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• Digital timer from 1 min. up to 999 hours for:

1. ON (continuous operation),
2. DELAYED ON,
3. HOLD or HOLD set-temperature dependent with guaranteed holding time

• Digital display (LED) of all set parameters, such as temperature and alarm values (0,1 °C resolution) as well as time values
• Calibration facility on controller
• Audible and visual alarm at programme end and as input acknowledgement as well as in case of low liquid level; heating is switched off automatically

Triple Overtemperature Protection

1. In case of overtemperature due to failure, the heating is switched off at approx. 10 °C above the set temperature (fixed value).
2. An independently working, electronic overtemperature controller TWW protection class 3.1 or overtemperature limiter TWB protection class 2, adjustable in set-up menu by customer with a resolution of display and setting accuracy: 0,1 °C below 99,9 °C, 1 °C above 100 °C .
3. In addition a mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30 °C above max. temperature of the bath

Construction
Textured Stainless Steel Casing material 1.4301 (ASTM 304), corrosion resistant. 

Interior - Heating Concept easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded  corrosion-proof large-area heating on three sides.